Black & Decker GW3030-QS Mode D'emploi page 8

ENGLISH
Electric safety can be further improved
u
by using a highsensitivity 30 mA Re-
sidual Current Device (RCD).
Using an extension cable
Always use an approved extension
cable suitable for the power input of
this tool (see technical data). The
extension cable must be suitable
for outdoor use and marked ac-
cordingly. Up to 30 m of 1.5 mm²
HO5V V-F extension cable can
be used without loss of product
performance. Before use, inspect
the extension cable for signs of
damage, wear and ageing. Replace
the extension cable if damaged or
defective. When using a cable reel,
always unwind the cable com-
pletely.
Residual risks.
Additional residual risks may arise
when using the tool which may not
be included in the enclosed safety
warnings. These risks can arise
from misuse, prolonged use etc.
Even with the application of the
relevant safety regulations and the
implementation of safety devices,
certain residual risks can not be
avoided. These include:
Injuries caused by touching any rotat-
u
ing/moving parts.
Injuries caused when changing any
u
parts, blades or accessories.
Injuries caused by prolonged use
u
of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
8
(Original instructions)
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your tool
(example:- working with wood, espe-
cially oak, beech and MDF.)
Labels on Appliance
The following pictograms are
shown on the tool:
Warning! Read the manual
prior to operation.
Wear safety glasses or goggles
when operating this appliance.
Wear suitable ear protection
when operating this appliance.
R
Do not expose the tool to rain or
high humidity or leave outdoors
while it is raining.
Switch off: remove plug from
mains before cleaning or main-
tenance.
Beware of flying objects.
Keep bystanders away.
Directive 2000/14/EC guaran-
teed sound power.