Dmx Channels - AFX 8ROLL-FX Manuel D'utilisation

1. Press the MENU button until "VER" is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to exit
TEST - Self test program
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
RSET
1. Press the MENU button until "RSET" is displayed. Press the ENTER button.
2. Press YES to restore factory settings.
How to operate Motor Offset function :
Press "MENU" button , then press "ENTER" for 3 seconds at least. When the interface shows "Pan Offset", you can
choose "Tilt Offset" by button "+" or "-" , press button "Ok" to set motor position from value -127....127. Then press
button "OK" to save .

DMX CHANNELS

10 channel definition table
Channel
1
2
3
4
5
6
7
8
9
©Copyright LOTRONIC 2016
DMX Value
0---255 PAN rotation 0-540°
TILT1 rotation
0---127 360° rotation
128---191 CW rotation fast -> slow
192---255 CCW rotation slow -> fast
TILT2 rotation
0---127 360° rotation
128---191 CW rotation fast -> slow
192---255 CCW rotation slow -> fast
0---255 Dimmer 0-100%
Strobe
000-015 Open strobe
016-131 Strobe from slow to fast
132-139 Open strobe
140-181 Slow open fast close
182-189 Open strobe
190-231 fast open slow close
232-239 Open strobe
240-247 Random strobe
248-255 open strobe
0---255 Red dimmer
0---255 Green dimmer
0---255 Blue dimmer
0---255 White dimmer
Function
8ROLL-FX Page 6