Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
19. Setting datAshur BT as Read-Only
Your datAshur BT can be set as Read-Only (Write-Protected).
To set as Read-Only, first unlock your datAshur BT as described in section 7. Once the drive is unlocked
showing a
GREEN
padlock ( ) on the App and solid
Setting datAshur BT as Read-Only
1. Tap on the
GREEN
padlock.
2. Tap the Read-Only switch to
then tap LOCK.
Note:
The drive will lock. Next time the drive is
unlocked access will be restricted to Read-Only.
3. To disable (turn off) Read-Only tap the
switch to Off and tap LOCK.
Note:
The drive will lock. Next time the drive is
unlocked access will be back to Read/Write.
20. How to enable Remote Wipe
To prevent leaving critical data vulnerable should your datAshur BT Personal be lost or stolen, remote wipe safeguards
against this by allowing you to remotely wipe (delete) the encryption key, all data and credentials.
To enable Remote Wipe, first unlock your datAshur BT as described in section 7. Once the drive is unlocked
showing a
GREEN
padlock ( ) on the App and solid
How to enable Remote Wipe
GREEN
1. Tap on the
padlock.
2. Tap the Remote Wipe switch to
then tap ENABLE.
3. To disable (turn off) Remote Wipe tap the
switch Off and tap OK.
Caution:
Do not remove (delete) the drive name from the list of paired drives on the datAshur BT Personal App or the
ability to wipe remotely (remote kill) will be no longer possible.
Blue
( ) LED on your datAshur BT, proceed with the following steps.
ON
and
Blue
( ) LED on your datAshur BT, proceed with the following steps.
ON
and
www.istorage-uk.com
App
App
drive LED
drive LED
#15
Publicité
Chapitres
Table des Matières
