Part Description; Safety Precautions - Makita ER400MP Manuel D'emploi Et De Sécurité

Part description

3
The numbers below refer to the figure
1. Shaft
2. Protector (Cutting tool guard)
3. Cord cutter
4. Nylon cutting head (String trimmer head)

Safety precautions

WARNING: Read all safety warnings and all instructions
in this booklet and the instruction manual of the power unit.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "string trimmer" and "equipment" in the warnings and
precautions refer to the combination of the attachment and the
power unit.
Intended use
• This attachment is designed only for the purpose of trimming
grass and light weed in conjunction with an approved power unit.
Never use the attachment for the other purpose. Abusing the
attachment may cause serious injury.
General precautions
• Before starting the string trimmer, read this booklet and the
instruction manual of the power unit to become familiar with the
handling of the string trimmer.
• Do not lend the attachment to a person with insufficient
experience or knowledge regarding handling of string trimmers.
• When lending the attachment, always attach this instruction
manual.
• Do not allow children or young persons under 18 years old to use
the string trimmer. Keep them away from the string trimmer.
• Handle the string trimmer with the utmost care and attention.
• Never use the string trimmer after consuming alcohol or drugs, or
if feeling tired or ill.
• Never attempt to modify the attachment.
• Follow the regulations about handling of string trimmers in your
country.
Personal protective equipment
•
1
•
•
2
Work area safety
•
•
4
•
•
•
•
Putting into operation
•
•
•
•
Starting engine
•
•
•
•
•
3
Wear safety helmet, protective goggles and protective gloves to
protect yourself from flying debris or falling objects.
Wear ear protection such as ear muffs to prevent hearing loss.
Wear proper clothing and shoes for safe operation, such as
a work overall and sturdy, non-slip shoes. Do not wear loose
clothing or jewelry. Loose clothes, jewelry or long hair can be
caught in moving parts.
Operate the equipment under good visibility and daylight
conditions only. Do not operate the equipment in darkness or fog.
Start and operate the engine only outdoors in a well ventilated
area. Operation in a confined or poorly ventilated area can result
in death due to suffocation or carbon monoxide poisoning.
During operation, never stand on an unstable or slippery surface
or a steep slope. During the cold season, beware of ice and snow
and always ensure secure footing.
During operation, keep bystanders or animals at least 15 m
away from the equipment. Stop the engine as soon as someone
approaches.
Before operation, examine the work area for stones or other
solid objects. They can be thrown and cause injury or property
damage.
WARNING: Use of this product can create dust containing
chemicals which may cause respiratory or other illnesses.
Some examples of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals, work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Before assembling or adjusting the equipment, switch off the
engine and remove the spark plug.
Before starting the engine, inspect the equipment for damages,
loose screws/nuts or improper assembly. Check all control levers
and switches for easy action. Clean and dry the handles.
Never attempt to start the engine if the equipment is damaged or
not fully assembled. Otherwise serious injury may result.
Adjust the shoulder harness and hand grip to suit the operator's
body size.
Wear the personal protective equipments before starting the
engine.
Start the engine at least 3 meters (10 feet) away from the fueling
spot.
Before starting the engine, make sure that there is no person or
animal in the work area.
When starting the engine, keep the rotating parts clear of your
body and other object, including the ground. They may rotate
when starting and may cause injury or damage to the equipment
and/or property.
Place the equipment on firm ground. Maintain good balance and
secure footing.