OPERATION
After you connected the lighting chain to the mains, the lamps start burning.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption/tube:
Power consumption/meter:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
LEDs/meter:
LEDs/tube:
LED-distance:
Tube-diameter:
Weight/tube:
Accessories:
RUBBERLIGHT mounting-clip, 50 pieces
RUBBERLIGHT 1-channel Jack with open wires
RUBBERLIGHT 1-ch. Connector w/IEC-plug
RUBBERLIGHT 1-ch. Connector
RUBBERLIGHT End cap
RUBBERLIGHT Hose clip, 1 piece
RUBBERLIGHT 1-chanel T-piece connector
RUBBERLIGHT 1-chanel X-connector
RUBBERLIGHT 1-chanel straight connector
RUBBERLIGHT 1-chanel 90°-connector
Self-adhesive mounting with tie-strap
Installation-channel for RUBBERLIGHT
Glue for RUBBERLIGHT 1 bottle
Please note: Every information is subject to change without prior notice. 10.02.2010 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
C
230 V AC, 50 Hz ~
100 W
max. 5 W
45° C
60° C
0.5 m
0.1 m
36
1584
28 mm
13 mm
6.5 kg
No.
50510100
50510110
50510112
50510113
50510120
50510125
50510130
50510135
50510140
50510145
50510150
50510170
50510175
12/20
00027067.DOC, Version 1.5