Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
If no key is pressed, the unit exits MENU after 10 seconds.
the display.
Note: UP/DN keys (14) on the microphone have the same effect as the
rotation of the rotary CH knob (3). PTT switch (13)
and
exists
MENU.
disappears.
1) COLOR
choose
This function allows to
Press the F key (9) to
enter
MENU.
1.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
the COLOR function.
2.
Press the F key (9) to
validate.
3.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
the color. 7 available colors over and over :
4.
New press on the F key (9) to
stops blinking. a) Go to point 1 to
PTT switch (13) to
validate
and
5.
If no key is pressed, the unit
exits
the display.
Default COLOR is
(orange).
2) DIM
The DIM function (dimmer) allows to
the backlight or OF (no backlight).
Press the F key (9) to
enter
MENU.
1.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
the DIM function.
2.
Press the F key (9) to
validate.
3.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
a new value.
4.
New press on the F key (9) to validate. The parameter stops blinking. a)
Go to point 1 to
adjust
another function or b) Press the PTT switch (13) to
validate
and
exit
MENU.
disappears.
5.
If no key is pressed, the unit
exits
the display.
Default DIMMER value is 9.
disappears from
validates
the last setting
the backlight color of the LCD.
is displayed.
The current COLOR blinks on LCD.
validate
the chosen color. The parameter
adjust
another function or b) Press the
exit
MENU.
disappears from the display.
MENU after 10 seconds,
disappears from
adjust
the brightness (from1 to 9) of
is displayed.
The current value blinks on LCD.
MENU after 10 seconds,
disappears from
3) KEY BEEP
When the function is activated, a beep
changing the channel etc. "BP" appears on the display when the function
is active.
Press the F key (9) to
enter
1.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
the KEyBP function.
2.
Press the F key (9) to
validate.
3.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
activate
On /
deactivate
Of the function.
4.
New press on the F key (9) to validate. The parameter stops blinking. a)
Go to point 1 to
adjust
another function or b) Press the PTT switch (13) to
validate
and
exit
MENU.
5.
If no key is pressed, the unit
the display.
Default KEY BEEP is On.
4) ROGER BEEP
When the function is active, the icon
sounds
when the PTT switch (13) on the microphone is re-
The Roger Beep
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Press the F key (9) to
enter
1.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
select
the RG BP function.
2.
Press the F key (9) to
validate.
3.
Turn the rotary CH knob (3) or use UP/DN keys (14) on the microphone to
activate
deactivate
On /
Of the function.
4.
New press on the F key (9) to validate. The parameter stops blinking. a)
Go to point 1 to
adjust
another function or b) Press the PTT switch (13) to
validate
and
exit
MENU.
5.
If no key is pressed, the unit
the display.
Default ROGER BEEP is Of.
5) SWR ADJUSTMENT
This function allows to adjust the SWR (Standing Wave Ratio) by beep tones.
Press the F key (9) to
enter
10
sounds
when a key is pressed, by
MENU.
is displayed.
The current status blinks on LCD.
disappears.
exits
MENU after 10 seconds,
disappears from
appears on the display.
MENU.
is displayed.
The current status blinks on LCD.
disappears.
exits
MENU after 10 seconds,
disappears from
MENU.
is displayed.
Publicité
Table des Matières
