Dear Customer; Owner Responsibility; Presentation; Design And Features - Husqvarna PG 820 RC Manuel D'utilisation

Dear customer!

Thank you for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorised
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (using, service, maintenance etc.) the life span
and the second-hand value of the machine can be
extended. If you ever lend or sell this machine, make sure
that the borrower or buyer gets the operator's manual, so
they will also know how to properly maintain and use it.
More than 300 years of innovation
Husqvarna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles
XI ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.

Owner responsibility

It is the owner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restict the use of this machine.
Find out what regulations are applicable where you work
before you start using the machine.
The manufacturer's reservation
Subsequent to publishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
4 – English

PRESENTATION

Design and features

Values such as high performance, reliability, innovative
technology, advanced technical solutions and
environmental considerations distinguish Husqvarna's
products. Safe operation of this product requires the
operator to read this manual carefully. Ask your dealer or
Husqvarna should you need more information.
Some of the unique features of your product are
described below.
PG 820 RC/PG 680 RC
The Husqvarna PG 820 RC and PG 680 RC floor grinder
is designed for dry or wet grinding of concrete, marble,
terrazzo and granite. It can be used for everything from
rough grinding to fine polishing. The machine is intended
for commercial use, for example in hotels, schools,
hospitals, factories, offices etc.
• Operating the machine with the remote control via
radio communication allows the operator freedom to
move and a good overview of the work.
• The remote control is easy to operate, even when
wearing gloves. Setting changes and operation are
performed using just a few buttons. It has a 3.5 inch
digital color display.
• The operator can easily make adjustments and
monitor system information via the remote control's
digital display.
• The planetary head and grinding discs are driven by
separate motors, Dual Drive Technology™. This gives
the operator full control of the speed of both the
planetary head and the grinding discs independently
of each other.
• A grinder with 3 grinding discs gives greater
downward pressure on the grinding discs, which gives
a high rate of work. It also offers more stable operation
on uneven surfaces.
• Gear-driven planetary head for power transfer and
premium quality belt for the grinding discs.
• Industrial strength construction.