Storage; Long-Term Storage Of Battery - Husqvarna PG 820 RC Manuel D'utilisation

Lift the machine
• When lifting the machine there is a risk of injuring
persons or damaging the machine or the
surroundings. Define the risk area and check that
nobody is present within the area when lifting.
• Always use the lifting eyes on the machine when
lifting.
Transport the machine on a means of
transport
CAUTION! The grinding unit should rest
!
on the ground and always have the tool
plates fitted to protect its locking devices
during transport.
Do not use the support wheel for
anchoring.
• Raise the support wheel as much as possible so that
the grinding unit is resting on the surface. The support
wheel can be swung up to take less room. Anchor the
machine so that it will not make involuntary
movements.

Storage

• Raise the support wheel as much as possible so that
the grinding unit is resting on the surface. The support
wheel can be swung up to take less room.
• Ensure the machine is cleaned and that a complete
service is carried out before long-term storage. For
more information, see the "Maintenance and service"
section.
OPERATING

Long-term storage of battery

• Maintenance charge the machine battery ever 6
months in long-term storage.
• The remote control battery should be removed from
the remote when storing for longer than 6 months.
–
English 33