Assembling And Adjustments; General; Handle Height; Connect The Machine - Husqvarna PG 820 RC Manuel D'utilisation

General

WARNING! The machine should be
!
switched off with the power cable
disconnected from the outlet.

Handle height

Manual operation
CAUTION! It is recommended that this
!
height be set as close as possible to the
height of the operator's hip bone. When
the machine is running, there will be a
grinding force/pull to one side that can
be felt through the handlebars. Use the
hip to resist this force instead of trying to
control this through the arms (such
positioning will be much easier for the
operator using the machine over
prolonged periods of tim.
• Set handle to most comfortable working height using
adjustment lever.
• Adjust the height of the top part of the handlebar.
12 – English

ASSEMBLING AND ADJUSTMENTS

Connect the machine

Connect the vacuum cleaner
It is highly recommended to use the Husqvarna DC6000
dust extraction system for complete dust control.
PG 820 RC
Connect the dust extractor to the machine.
PG 680 RC
Connect the dust extractor to the machine.
• Ensure the STOP/RUN switch is set on Stop (rotate
counter clockwise).
• Connect the power plug from the grinder to the power
outlet on the dust extractor.