Disassembly And Disposal - SIKA InduQ VMI Série Notice D'utilisation

®
induQ
— Series VMI

8 Disassembly and disposal

CAUTION! Risk of injury!
Never remove the device from a plant in operation.
 Make sure that the plant is shut down professionally.
Before disassembly:
Prior to disassembly, ensure that
 the equipment is switched off and is in a safe and de-energised state.
 the equipment is depressurised and has cooled down.
Disassembly:
 Remove the electrical connectors.
 Remove the VMI using suitable tools.
Disposal:
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device must
be disposed of separately as electrical and electronic waste.
NO HOUSEHOLD WASTE!
The VMI consists of various different materials. It must not be disposed of with house-
hold waste.
 Take the VMI to your local recycling plant
or
 send the VMI back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
Technical changes reserved
Disassembly and disposal
- 35 -