Eco Super 1200 LED Guide D'utilisation page 26

Configuration and Function
2. Base:
When the handpiece is placed in the charger base, the LED on the base
will indicate the status of the battery.
3. Working time:
Super 1200
In case of long irradiation next to the pulp or soft tissues, irreversible
damage can occur; therefore, exposure time in strong mode (full energy,
see Chapter 'start-up') close to the pulp must not exceed 5 seconds on
the same spot (acoustic beep after 5 seconds)!
4. Automatic power off:
If not used the unit will switch off automatically after 3 minutes.
It can be turned on again by pressing the power button.
26
Green: fully charged
LED
Red: charging
MoDUS
pulse mode
gradually mode
strong mode
tIME
20s
15s
10s