Listening To Music - Sony TMR-BT10 Mode D'emploi

OPERATING THE UNIT

Listening to music

Check the following before
operating the unit.
– Pairing of this unit and the
BLUETOOTH receiving device is
complete.
– The BLUETOOTH receiving
device is on standby for
connection.
– The BLUETOOTH receiving
device supports the receiving
music function (profile: A2DP).
1
Connect the stereo mini
plug of this unit to the
headphone jack of a
stereo audio source
device.
Note
When connecting to a stereo audio
source device, be sure to connect
this unit to the headphone jack, not
to the LINE OUT jack.
2
Turn on the stereo
12
audio source device.
US
POWER
button
3
Press and hold the
POWER button for
about 3 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice, then the unit is turned
on. After the unit is turned on,
it connects to the
BLUETOOTH receiving
device automatically.
Notes
• Do not press and hold the
POWER button for more than 7
seconds, otherwise pairing mode
is entered.
• Make sure to turn on only the
BLUETOOTH receiving device
you want to connect with this
unit. If many BLUETOOTH
receiving devices are turned on,
the connection may not be done
as you desire.
• If this unit cannot make the
BLUETOOTH connection with a
paired device, pair the device
again, or try making the
BLUETOOTH connection from
the BLUETOOTH receiving
device if possible.
Tips
• While searching a
BLUETOOTH receiving device,
the indicator (blue) keeps
flashing.
• If two or more devices are paired
with this unit, this unit tries to
connect with either of the last
two devices recognized before.