Before Use; Speaker Setup - Alecto PAS-215A Mode D'emploi

The PAS-215A functions on the mains.
The PAS-215P receives its signal from the PAS-215A or from another amplifier
connected through the supplied speaker cable with Speakon plugs.
MAINS POWER:
Use the supplied power cord to connect the PAS-215A with the mains. Only con-
nect the PAS-215A to a mains power of 230 Volt.
POWER SWITCH:
Use the power switch to turn the speaker on and off.
MIC VOLUME CONTROL (microphone):
You can connect a microphone using a (XLR) plug (balanced / symmetrical) or
(Jack) plug (balanced / symmetrical). You can then use the MIC volume control to
adjust the volume.
LINE VOLUME CONTROL (AUX):
You can connect separate devices to the PAS-215A, for example a DVD player
(sing-a-long), tablet, smartphone or separate MP3 player. These devices are
provided with a line output and can be connected to the LINE input using the
appropriate cables (not included).
- XLR input
- Cinch input
- 3.5mm stereo jack input
We recommend you to use the XLR input, Cinch input or 3.5mm stereo jack input
separately. When using multiple inputs simultaneously, the sound may become
distorted. Use the LINE volume control to adjust the volume of these inputs.
HIGH: Use this control to adjust the treble level.
LOW: Use this control to adjust the bass level.
MIX OUT: Symmetrical XLR output to an additional amplifier or active speaker.

BEFORE USE

SPEAKER SETUP

34