Steba QH 1800 Mode D'emploi page 12

∙ Do not use the heater in rooms with explosive gas, while using
inflammable solvents or varnish or glues or where inflammable
materials are being used, such as wood block or PVC flooring is
being laid or sealed.
∙ If the cordset is damaged and you have to change it, do not do
the job yourselves! Take the product to an after sales authorised
repair centre or to a person with similar skill and knowledge, in
order to avoid any risk of danger.
∙ The appliance must be positioned so that the plug is always
accessible.
Positioning
∙ The product must be installed respecting the minimum distances from ceiling, floor
and objects at the sides indicated in picture #1. This infrared wall mounted heater
is only suitable for mounting horizontally on a solid vertical wall. Never install it
vertically or on the ceiling as indicated in picture #2.
∙ The product must not be mounted on any inflammable surface such as wood or
plastic. Any inflammable materials must be at least 100 cm. away from the front
face. This is also the minimum distance the user has to keep from the product be-
cause during use the front grille gets hot.
∙ Care should be taken to mount the appliance so that the product and the pull cord
switch are out of the reach of children. If it is installed in a bathroom, it should
be positioned so that it cannot be touched by anyone who is in the bath or in the
shower.
∙ After use we recommend to leave the product cool down for at least 10 – 15 mi-
nutes before touching it.
12