Installing; Installing Of Monitor; Using - Extel LILLY DF-P1201 Guide D'installation Et D'utilisation

4. INSTALLING

a. Installing of outdoor station (fig. 2)
1. Remove the spy-hole from the door or pierce a Ø15mm hole at a height of approximately
1.60m
2. Choose a conduit adapted to the thickness of the door
- 35 to 50mm (delivered as standard with the video camera)
- 50 to 75mm
- 75 to 105mm
3. Slide the ribbon cable 12 through the hole in the door
4. Remove the adhesives and glue the mounting brackets of the monitor 8 to the door, res-
pecting the position of the spy-hole.
5 Slide the conduit through the bracket and screw it onto the video camera.
b.Installing of monitor (fig. 2-3)
1. Remove the hatch
2. Slide the ribbon cable through the opening of the hatch 7
3. Connect the ribbon cable to the monitor jack 9 (make sure the direction of the ribbon
cable is respected (fig. 2a)
4. Place the monitor on its bracket and attach it with the 2 screws 13. Install the 2 caps 14
5. Once the installation is complete, open the hatch 6 (fig3) of the monitor to position the
AAA batteries, observing the correct polarity.

5. USING

Using the videophone
• When someone presses the outside button, the call is heard
• Press O to turn on the screen and identify the visitor.
Use + to zoom in and – to reduce the format of the image.
http://www.bakonline.net/
LILLY - CFI EXTEL - 03/2012
GB3