Electrolux EQT4520BOG Notice D'utilisation page 27

Set the Count Down Timer after the
selection of the roasting zone.
The selection of Timer function is
possible for roasting zones that
are active and the heat setting is
set.
• To set the roasting zone: touch
again and again until the indicator of a
necessary roasting zone comes on.
When this function is activated,
comes on.
• To activate the Count Down Timer:
touch of the timer to set the time (
00 99
- minutes). When the indicator
of the roasting zone starts to flash slow,
the time counts down.
• To see the remaining time: set the
roasting zone with
the roasting zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the roasting zone with
or .
• To deactivate the Count Down Tim-
er: set the roasting zone with
Touch . The remaining time counts
00
back to . The indicator of the roast-
ing zone goes out.
When the timer countdown comes to an
end, the sound operates and
es. The roasting zone deactivates.
• To deactivate the sound: touch
The Count Up Timer
Use the Count Up Timer to monitor how
long the roasting zone operates.
• The selection of the roasting zone
(if more than 1 roasting zone oper-
ates) : touch again and again until
the indicator of a necessary roasting
zone comes on.
When this function is activated,
comes on.
• To activate the Count Up Timer:
Touch
The symbol goes out and
on.
. The indicator of
touch
.
00
flash-
comes
• To see how long the roasting zone
operates: set the roasting zone with
. The indicator of the roasting zone
starts to flash quickly. The display
shows the time that the zone operates.
The display shows the time of the
roasting zone that operates for longer
period of time.
• To deactivate the Count Up Timer:
set the roasting zone with
. The symbol
comes on.
• To reset the Count Up Timer: touch
. The time counts back to
When the two Timer functions op-
erate at the same time, the display
shows the Count Up Timer first.
The Minute minder.
You can use the timer as a minute mind-
er while the roasting zones do not oper-
ate. Touch .
Touch or of the timer to set the
time. When the time comes to an end, the
sound operates and
• To stop the sound: touch
4.6 Lock
You can lock the control panel, but not
. It prevents an accidental change of the
heat setting.
First set the heat setting.
To start this function touch
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.7 The Child Safety Device
This function prevents an accidental oper-
ation of the hob.
Starting the Child Safety Device
• Start the hob with
heat setting.
• Touch
for 4 seconds. The symbol
comes on.
• Stop the hob with
ENGLISH 27
and touch
goes out and
00
.
00
flashes.
. The sym-
. The heat
.Do not set the
.