Guidelines; Export; Equipment; Accessories - JK-Products Ergoline EVOLUTION 660 TURBO POWER Instructions D'utilisation

Please read and observe ...

Guidelines

This device was built according to UL STD 482, certified to CAN/CSA
STD C22.2 2 No. 224.
CAUTION – Air inflow and outflow
Do not change, obstruct or block the air inflow and outflow
area to the device or make any unauthorized changes to the
device. The manufacturer shall bear no liability for damage or
injuries resulting from such actions.

Export

We would like to point out that the devices are exclusively intended for
use in the US and Canada, and may not be exported to other countries
and operated there! The manufacturer shall assume no liability whatso-
ever in case of non-observance! We explicitly emphasize that high liabil-
ity risks may occur for the exporter an/or the operator in case of non-
observance.
16

Equipment

The equipment of the devices differs depending on the model.
In this instruction manual all standard and optional components/functions
are taken into account which must be observed during operation and/or
when performing maintenance.
The control panel is also affected by the differing equipment: Only those
buttons are visible that can be operated, i.e. the corresponding function
must be part of the equipment of the device.

Accessories

Some accessory parts are taken into account in the maintenance sched-
ule beginning on Page 44, however this does not automatically mean that
your device is provided with this equipment.
An overview of the possible accessories is provided in the sales docu-
mentation.