Montiss Steam mop Mode D'emploi page 33

Method two：
Remove the water tank from the main body, open the water tank cup by counterclockwise
rotation, fill the water tank from the water faucet and then clockwise rotation to close the water
tank cup.
Install the water tank to main body with a little hard until it clicks into place
2 Plug in the appliance to a grounded outlet.
3 Press the power switch, the indicator lights will turn red, it indicates preheating. If the light does
not illuminate, please check the "troubleshooting" section for more details.
4 The appliance warm-up time is 25 seconds, after the completion of preheating, the indicator
light will turn to be blue, the appliance begins to work.
NOTICE: If power failure in the middle of the warm-up or power-off after the warm-up is
complete, turn the power supply on again, according to the interval of the power is turned on
again, the product may repeat the above warm-up operation.
5 When normal cleaning, the steam head has a big rotary angle, can clean corners and also can
clean low spaces.
6 Using the scraping tool:
•
Pressing the mop head salient point, remove the mop head from the main body.
•
Slide the big scraping tool into the main body until the big scraping tool clicks into place.
33