Montiss Steam mop Mode D'emploi page 32

Attaching the steam head:
1
Slide the bottom end of main body into
the steam head until steam head spindle. clicks into place.
2 The steam head can be removed from the main body
by pressing salient point on the steam head spindle.
Attaching a cleaning pad:
1 As barb design at the bottom of steam head , just only
place a micro-fiber cleaning pad to steam head, they can bond hard.
2 Place the front of your shoe onto the cleaning pad removal
tab and press down firmly.
Attaching Carpet Gilder
1 Press the micro-fiber cleaning pad (E) with main body to the
carpet gilder by vertical pressure, until it clicks into place.
2 Place the front of your shoes onto the cleaning pad (E) removal tab and
press down firmly and the carpet gilder will remove from the steam head.
OPERATION
1 Filling the water tank
Method one：
Remove the water tank from the main body, open the
water tank cup by counterclockwise rotation, fill 450ml
water into the water tank by using the measuring cup and then
clockwise rotation to close the water tank cup.
32