Cleaning And Maintenance - SOLAC VT8825Solac Mode D'emploi

• The range of the remote control unit is up to 6 metres from the fan. Point
it straight at the front of the fan to ensure good transmission.
• The fan will make a "beep" noise, and the lights on the control panel will
light up, confirming that the device has received the instructions sent
through the remote control unit.

CLEANING AND MAINTENANCE

• Your appliance must be disconnected from the mains before any cleaning
operation is performed.
• Clean with a slightly damp cloth.
• Never immerse the appliance in water or any other liquid. Check that no
drops of liquid enter the motor area.
• Do not use solvents or abrasive cleaners to clean the device, since they could
damage its plastic parts.
• When the appliance is not in use it should be kept in a damp-proof loca-
tion.
12