Plum GUIDE RENTAL Mode D'emploi page 34

HIGH Position (GUIDE/GUIDE Rental only)
Set in the HIGH position, the heelpiece is switched in order to let the heel move
freely and enable you to step on the top tower of the top plate.
In such position, the toe piece must be set in WALK Mode.
To switch from one position to the next, follow these instructions:
- Elevate your boot so as not to be in contact with the heelpiece.
Place the tip of your pole in one of the tower holes (10 or 11), with either
-
right or left hand.
- Twist your pole until you reach the desired position.
User Manual
15 | P a g e