Smtp - Abus TVIP20000 Manuel Utilisateur

6.9 SMTP

Settings can be made here for the transmission of snapshots or video clips to an e-mail address over an
SMTP server.
General
e-Mail (SMTP):
SMTP server name:
SMTP server port:
SSL:
Authentication:
SMTP:
POP before SMTP:
POP server name:
User name:
Password:
Recipient e-Mail address:
Administrator e-Mail address: The address of the e-mail account. The maximum length is 64 characters.
Attached file type:
Subject:
Message:
Activates or deactivates the transmission of image data to an e-mail address.
Enter the SMTP server name of the e-mail sender here (e.g. smtp.web.de).
The maximum length is 64 characters.
The default SMTP server port is 80. An alternative port can be specified here,
if required.
If the e-mail server uses SSL, then this can be activated here.
Specify the authentication type for the e-mail account here.
If authentication is made using a user name and password on the e-mail
server, then this option must be activated.
Select this option if the send/receive e-mail function is required before e-mails
are sent. It may be possible to delete "POP before SMTP" in the e-mail
account settings.
Enter the POP server name of the e-mail sender here (e.g. pop.web.de). This
option is only available when "POP before SMTP" is active. The maximum
length is 64 characters.
User name of the e-mail account.
Password of the e-mail account.
The e-mail address of the recipient. The maximum length is 64 characters.
Select here whether snapshots or video clips should be transferred to the
FTP server.
Enter a subject here (max. 64 characters).
The message cannot be longer than 384 characters. A line break uses 2
characters.
123
English