elem Garden Technic TRT2530-17FR Traduction Des Instructions Originales page 94

10. SPECIFICATION
Engine
Displacement
Power
Idle speed min-1
Speed min-1
2 Time ratio petrol: oil
Fuel tank
Ignition system
Candle
Electrode gap,
Lubrication system / fuel
Capacity of lubricating oil tank chain,
Type of oil pump Automatic pump with automatic adjustment
Weight
Chain saw without bar or chain, empty tanks, kg
Chain saw with bar, chain and full tanks, kg
Chain / chain guide
The Saw
Cutting length
Guide
specified gauge
Sprocket (number of teeth× pitch)
Chain links:
Chain pitch:.
Chain gauge:
Guide bar thickness:
Chain speed at max power
Noise emission values measured according to relevant standard :
Acoustic pressure level
Acoustic power level
Weighted root mean square acceleration according to relevant standard. :
Front handle: 7.5 m²/s
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another that the declared vibration
total value may also be used in a preliminary assessment of exposure.
25.4 cm ³
0.7kW
3000+/-500
12000
40: 1 (95/98oct: SAE 10W-30)
230 cm³
L8RTF/NHSP
0.6-0.7 mm
160 ml
L
PA
L
WA
The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
K = 1,5m²/s
3.0
4.2
12'' - ref 3/8-APL-44S (30cm)
26 cm
Guide Star 12'' – ref AP12-44-509P
0,05" (1.27mm)
6 teeth×3/8''
44 links
3/8''
0,05''
4mm
23m/s
99.6 dB(A) K = 3dB(A)
113 dB(A) K = 3 dB(A)
ATTENTION !
Rear handle: 7.5 m²/s K = 1,5m²/s
94