Remote Controls - Trevi SB 5010TV Mode D'emploi Et Branchement

ENGLISH
NOTES ON USE
This is a precision electronic appliance; avoid using it in the following cases:
- Near strong heat sources, such as central heating plants or stoves.
- In very humid places such as bathrooms, swimming pools, etc.
- In very dusty places.
- In places subject to strong vibrations.
 Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).
 Do not block the air inlets.
 If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorised service centre.
 Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
CARE AND MAINTENANCE
Use a slightly damp soft cloth for cleaning. Do not use solvents and abrasive substances.
IMPORTANT
This appliance has been carefully built to ensure long-lasting perfect performance. However, should any inconvenience occur, please contact your
local authorised TREVI Service Centre.
TREVI follows a policy of ongoing research and development. Therefore products may have different features from those described.
DESCRIPTION OF CONNECTORS/CONTROLS
Controls and sockets on the device
1. Power button/standby
2. SOURCE button, select active input
3. Key / / PAIR, play / pause, pairing operation on BT
4. Keys volume control (+ to increase volume, - to decrease the volume)
5. LED function display/input/standby
6. Display
7. Remote receiver
8. Power supply AC220/240V 50/60Hz
9. AUX input RCA stereo
10. Digital Optical input

Remote controls

1. Key on / off
2. SOURCE button, select active input
3. Keys volume control (+ to increase volume, - to decrease the volume)
/
4. Key 9
:, previous/next track selection
5. Key / PAIR, play / pause, pairing operation on BT
/
6. Key DIMMER, brightness of the display
7. MUTE button, activating MUTE
8. EQ button, audio equalization selection
REMOTE CONTROL BATTERY ACTIVATION AND REPLACEMENT
The remote control features a CR2025 battery.
To activate the remote control battery (supplied), remove the protective plastic tab.
To replace the battery:
1. Remove the battery compartment (see the picture in rear case of remote control).
2. Replace the battery with one of the same type (CR2025).
5
SB 5010TV