Introduction - LEM flex RR3020 Mode D'emploi

Introduction

2 INTRODUCTION
The LEM~flex RR3020 is an AC current probe utilising Rogowski principle.
The LEM flex RR3020 can be used to measure AC current up to 3000 A
when used with a DMM, oscilloscope, or other recording instruments. The
flexible measuring head allows current measurements on conductors that
are hard to reach or inaccessible using typical clamp-on current probes.
The LEM~flex RR3020 provides a low-voltage, (3 V AC), output proportional
to the current being measured. Three selectable ranges provide direct
readings for 30 A, 300 A, and 3000 A full scale.
2