Daily Inspection - REMA HS Série Mode D'emploi

◇ Connect the accessories to the lifting table according to the drawing.
Connecting screws must be tightened.
◇ Make sure that local alternating voltage and frequency is consistent in the
rated input of lift table.
◇ Use the lift table on flat and solid ground.
◇ All of the connection and halt of power supply must be operated by trained
personnel.
◇ While operating, it is forbidden to touch the moving parts of the lift table.
◇ While the lift table lifting or lowering, it is forbidden to adjust or to move the
load.
◇ It is forbidden to lift the load, which perhaps will do harm to a person or other
object.
◇ It is forbidden to operate the lift table while a person is under the table.
◇ Do not adjust the safety valve of hydraulic power pack.
◇ It is forbidden to operate the lift table even if there is small structure distortion.
◇ Do not use it in an explosive or flammable place.
◇ The lift table is a movable lifter designed to lift or lower rated load. Do not use it
for other purpose.
◇ Do not allow a person to operate the lift table, who does not understand its
operation.
◇ It is forbidden to modify the lift table without manufacturer's written admission.
◇ It is necessary to use the spare parts designated by manufacturer.
◇ Make sure to keep a distance between the table and ambient objects enough
to operate the lift table safely.
◇ Keep the hydraulic system under clean and safe condition.
◇ Hydraulic power
error of provided voltage should not excess ±10% to the rated voltage.
◇ Always do maintenance and routine check while the lift table is unloaded.
◇ The lift table is not waterproof and should be used in a dry environment.

Daily Inspection

WARNING: Do not use the lift table if any malfunction or fault is
found.
◇ Check all the terms of WARNING and CAUTION.
◇ Check the scratch, bending or crack on the lift table.
◇ Check smooth movement of the table.
◇ Check if there is any hydraulic oil leakage.
◇ Check the vertical creep of the table.
◇ Check if all the bolts and nuts are firmly tightened.
Operate the Lift table
WARNIING: Do not overload the lift table. Ensure the balance of
loading. Do not
load partially or concentrically.
pack is known as its trait that controlled by low voltage. The
9