Explanation Of Functions - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Roller shutter selection
With the roller shutter function, the roller shutter runs in maintained operation
mode after a travel button is pressed.
Venetian blind selection
With the venetian blind function, the venetian blind runs in touch mode to facil-
itate precise positioning of the laths. If you press a travel button for longer than
1 second, the venetian blind runs in maintained operation mode.
After moving to the programmed intermediate and end positions, the laths
automatically tilt (if the tilt position was programmed).
Manual/Automatic slide switch
In slide switch position " " only manual drive commands can be performed
(e.g.: UP, STOP, DOWN via button actuation).
In slide switch position " " automatic drive commands are performed (e.g.
time, Astro evening function,...)
Operating mode
On the display, you see the time and the current operating mode e.g. HOLI-
DAY.
OK button
The displayed values are saved by pressing the OK button in the menu.
+/- buttons
The following operations are possible via + and -:
• Menu ->Modify value
• Auto mode ->Retrieve information
∙
+ button ->Next automatic switching time
∙ - button ->Next automatic switching time
∙ - button and OK button -> Astro time
MENU button
By pressing the MENU button, you access the menu overview or Operating
mode.
The displayed value is not saved.
32 - en

Explanation of functions