Safety Instructions; Intended Use - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
• Dispose of used batteries properly. Only replace the battery with one of
the same type (see Technical Data).
Caution
•
Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
• Disconnect the connecting cable from the power prior to
installation.
• Always comply with regulations of local energy supply
companies as well as VDE 100 provisions for wet and
damp rooms during installation.
•
Keep people out of the system's range of travel.
•
If the system is controlled by one or several appliances,
the system's range of travel must always be visible during
operation.
• When connecting the control cables (protected extra-low
voltages), only use cables with sufficient electrical
strength.
•
Device contains small parts that can be swallowed.
The type of control unit described in these instructions may only be used for
the operation of roller shutter and blind installations.
The connection of external devices must be carried out in consultation with
specialist retailers.
28 - en

Safety instructions

Intended use