Alecto DC-700 Guide De L'utilisateur page 23

5. Connect the tape cable to the LCD unit on the
inside.
6. Slide the mounting tube through the mounting
hole of the LCD unit and carefully through the
hole in the door.
7. Use the supplied tool to carefully
AAA 1,5V
8. Now insert 3x 1.5V AAA size batteries into the
battery compartment, paying attention to the
correct polarity.
9. Replace the cover on the
LCD unit.
10. The slide is used to cover
the hole of the door-eye.
screw the tube
into the tube
of the camera
unit until the LCD unit and
camera are secured.
-23-