Installation Preparation - Alecto DC-700 Guide De L'utilisateur

DESCRIPTION.
The DC-700 is used as a door-eye with a conven-
tional peep-eye and a digital peep-eye with came-
ra and LCD display.
The DC-700 may replace the existing conventional
door-eye or you may drill a new hole for the DC-
700.

INSTALLATION PREPARATION:

1. Remove the old door-eye.
2. Use the supplied measuring
tool to check whether the
diameter of the current hole is
large enough (Ø14-22mm) for
fitting the tube.
3. If the hole is not large enough or in case the-
re's no hole, drill one of 14mm at eye height
into the door.
ATTENTION:
Keep in mind that the hole of the door-eye must be at eye
height, otherwise the image of the LCD display may not be
clear in certain circumstances.
-21-