Connect A Mobile Phone; Receiving A Call; Hanging Up; Placing A Call - Alpine TME-M740BT Mode D'emploi

Connect a Mobile Phone

If a mobile phone is connected for the first time, register a mobile phone
by doing the following.
Registration
Bluetooth Setting
Refer to "Setting the Bluetooth Connection (Bluetooth)"
(page 12).
Refer to "Sending Name Information of the Unit (VISIBLE
MODE)" (page 13).
Searching for a Mobile Phone
Refer to "Searching for Connectable Bluetooth Device
(Bluetooth Search) (SEARCH DEVICE)" (page 12).
Selection for a Mobile Phone
Touch [PAIR] of the mobile phone to be registered.
Inputting a pass code
Input a 4-digit to 10-digit number.
* When a pass code is input, enter the number within 30 seconds
to ensure security.
Input a pass code on the Mobile Phone.
Input the same pass code number (4-digit to 10-digit) as the
unit.
* When a pass code is input, enter the number within 30 seconds
to ensure security
Registration is complete.
Connection
Connection for a Mobile Phone
Refer to "Setting the registered Bluetooth Device (PAIRED
DEVICE)" (page 12).
Selection for a Mobile Phone
Touch [CONNECT] of the mobile phone to be registered.
The connection is made.
• The Bluetooth setting is required for a mobile phone. See the
Owner's Manual of the mobile phone.
• To input a pass code in the mobile phone, see the Owner's Manual of
the mobile phone.
• Perform the operations observing the screen of the mobile phone
until the connection has completed.
• If ON is set in "Setting a Connection automatically (AUTO
CONNECT)" (page 13), automatic connection of the previously
connected mobile phone will start when power is turned on.
• If you previously registered a mobile phone in the unit, select the
mobile phone you want from the registration device setting list. Refer
to "Setting the registered Bluetooth Device (PAIRED DEVICE)"
(page 12).

Receiving a Call

When a call is received, a received call sound rings, and the received
call is announced in the display.
Touch [ ].
The call starts.
• If ON is set in "Receiving a Received Call automatically (AUTO
ANSWER)" (page 13), an incoming call is answered automatically 5
seconds after it is received.
• You can set whether full-screen is displayed while a call is placed.
For details, refer to "Setting the Screen to be Displayed while
Calling (CALLING DISPLAY)" (page 10).

Hanging up

Touch [ ].
The call finishes.

Placing a Call

1
Touch [MOBILE PHONE] on the SOURCE SELECT
screen.
The MOBILE PHONE screen is displayed.
2
Select the desired method.
7
-EN