Tightening Torques Between Cable Gland And Connection Head - WIKA TR Série Mode D'emploi

5. Commissioning, operation
With cable or connector
EN
For the marking
of the cable ends,
see table
Single
thermocouple
Dual
thermocouple
Thermo connector
5.4 Tightening torques

5.4.1 Tightening torques between cable gland and connection head

Junction between cable gland and connection head
■
Thread
M20 x 1.5
½ NPT
Junction between cable and cable gland
■
Screw the pressure screw tightly into the adapter (use appropriate tools!)
1) Turns from finger tight (T.F.F.T)
16
Cable Lemosa connector,
male on the cable
Positive and negative terminal are marked.
Two thermo connectors are used with dual
thermocouples.
Tightening torques in Nm
12
T.F.F.T 2 - 3
1)
WIKA operating instructions, models TRxx and TCxx
Binder connector,
male on the cable
(screw-in plug)