GE Profile CustomStyle 22 Série Manuel D'utilisation Et D'installation page 27

5 TRANSFER MIDDLE HINGE
BRACKET TO THE LEFT
With a Phillips screwdriver, remove the cam riser
from the middle hinge and place it aside.
Remove the middle hinge, along with the shim,
by removing the three Torx screws.
Remove the three Torx screws from the middle left
side of the cabinet. Screw them into the holes on the
right side. (Do not overtighten.)
Place the shim and middle hinge bracket over the
holes at the middle left side of the cabinet. Insert and
tighten the three screws.
Middle Hinge
Bracket
Reattach the cam riser to the top of the middle
hinge bracket.
TRANSFER TOP HINGE TO
6
THE LEFT
Position the top hinge over the screw holes in the top
left of the cabinet, ensuring that it is lined up with the
other two hinges.
Put the Torx screws two or three threads into the
holes that were not used when the hinge was on the
other side, but DO NOT tighten them at this time.
Installation Instructions
Cam Riser
Top Hinge
27
7 REMOVE DOOR STOPS, CAM
RISER AND CAM CLOSURE
Remove the left hand door stops and cam closure
from the reversibility kit. The reversibility kit is taped
onto the bottom shelf of the refrigerator door.
If you have misplaced the kit, a new one can be
ordered.
WR49M303, KIT LH White
WR49M306, KIT RH White
WR49M311, KIT LH Bisque
WR49M310, KIT RH Bisque
WR49M305, KIT LH Black
WR49M308, KIT RH Black
Contact GE Parts & Accessories 800.626.2002
or visit our Website, www.GEAppliances.com. In
Canada call 1.888.261.3055 or visit our Website,
www.geappliances.ca.
From the freezer door, remove the door stop, along
with the cam riser, spacer shims and aluminum foil
from the right side of the bottom flange, using the
T-20 Torx Driver.
From the refrigerator door, remove the door
stop, along with the cam closure, spacer shims and
aluminum foil from the right side of the bottom
flange using the T-20 Torx Driver.
The door stops and cam closure on the right side can
be placed in the reversibility kit bag, and the rest of
the parts can be put aside, along with the new left
hand cam closure and door stops.
Freezer Door
Tape, Aluminum
Shim, Door Stop
Door Stop
Cam Riser
Screw
Refrigerator Door
Tape, Aluminum
Shim, Door Stop
Door Stop
Closure Cam
Screw