Abicor Binzel MF3-Laser Front/Rear Mode D'emploi page 37

MF3-Laser Front/Rear
5 Turn the lug on the tension lock (3) clockwise by at least 180°.
1
1
Flex supply
Fig. 8 Assembling the components
 Fig. 8 Assembling the components on page EN-13
6 Insert the control lead (3), flex supply (1), and wire guide (2) into the appropriate connectors one after the other.
6.3 Replacing the wire feed rollers
1 Open the housing cover at the lug and lift the cover up.
1
1 MF3-Laser Front
Fig. 9 Opening the housing cover
2 Push the clamp lever (3) up to release the locking mechanism.
BAL.0511.0 • 2021-06-29
2
Wire conduit
2 Housing cover
6 Commissioning
2
3
3
Control lead
2
EN - 13