Nameplate; Signs And Symbols Used; Scope Of Delivery - Abicor Binzel MF3-Laser Front/Rear Mode D'emploi

4 Scope of delivery

3.3 Nameplate

The MF3-Laser Front/Rear front drive is labeled as follows:
1
1 Device number
Fig. 2
Nameplate
When making inquiries, note the following information:
• Device number

3.4 Signs and symbols used

The following signs and symbols are used in the operating instructions:
Symbol Description
• Bullet symbol for instructions and lists
 Cross-reference symbol refers to detailed, supplementary, or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery
• MF3-Laser Front/Rear
Tab. 8
Scope of delivery
• Media plate (various versions)
Tab. 9
Options
• Drive rollers
• Pressure rollers
Tab. 10
Wear parts
The MF3 Laser Front/Rear front drive is part of the MFS-V3 system and comes without a connector set and quick coupling.
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be found in the current product catalog.
Contact details for consultation and placing orders can be found online at www.binzel-abicor.com.
EN - 8
MF3-Laser Front/Rear
• Operating instructions
• Insulating plate
• Wire guides
• Axes in the rocker arm
BAL.0511.0 • 2021-06-29