ALPATEC AC 9 FITP Mode D'emploi page 20

notice_AC9FITP-reso 15/01/06 17:21 Page 20
DRAINING OPERATION.
Your product is with shower technology, that means that most of the moistures will be drained through
the exhaust pipe.
This is automatic.
Sometimes there are too many moistures and some parts go in an inner water tank.
When the water tank is full, E2 error appears on VFD screen, unit "bip" several times and stops working.
Turn off the unit, put the movable water tank (16) under the drainage knob (11) and unscrew the knob
and rubber plug to let water flow out.
When water tank is empty, replace knob and rubber plug and restart the unit.
CLEANING
Before any cleaning operation, stop and unplug the unit.
Do not use chemical solvent.
Use a dry and wet cloth to clean the outside of the unit.
Anti dust air filter:
If the anti dust air filter is dirty, the air conditioner will be less performing.
Clean the filter at least every two months.
Take the filter (6) upward.
Take out the Bio-filter (7).
Wash with warm water and neutral cleanser, dry.
Put back the Bio-filter and the anti dust filter.
Bio-filter:
This filter is a non-washable filter: if Bio-filter becomes dark, change it. At least, replace the filter once a
year.
20