ALPATEC AC 9 FITP Mode D'emploi page 19

notice_AC9FITP-reso
Assemble extremity 13 on the pipe.
Assemble the pipe on the air conditioner in the exhaust air outlet 7.
- Through a wall:
Make a hole in the wall with diameter adapted to part 14.
Insert part 14 in the hole and extremity of the exhaust pipe in part 14.
If you do not use the air conditioner, you can close the hole using the cover of part 14.
- Through the window or the door:
Assemble window accessory 12 on the exhaust pipe extremity.
Open door or window and put the extremity of the pipe through it. (Fig. 6 and 6bis)
Note :
- Exhaust pipe can be as 1m50 long. The shorter it is, the more powerful your unit will be. Do not use
additional exhaust pipe. (Fig. 7)
- The pipe must not be damaged or bent.
(Fig. 8)
15/01/06 17:21 Page 19
AIR EXHAUST PIPE.
Fig. 7
Fig. 6 bis
19
Fig. 6
Fig.8