Room Temperature - Domo DO9090W Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DO9090W
anced. LCD shows the weight of luggage.
Wait for weight reading to stop and stabilise, flash for 3 times and locked, you will
hear a signal.
5. To re-weigh: press to reset LCD display to zero.
6. The scale will automatically turn off, after 1 min. showing the weight.

ROOM TEMPERATURE

Press to switch on the device, wait until LCD shows zero. Press two times on "unit" to
see temperature in Celsius and three times to see it in Fahrenheit.
Press again to revert
the normal weighing mode.
TO REPLACE BATTERY
LCD will display "Lo" when battery power is low. Replace battery as follows:
1. Hold the scale in one hand. The thumb and index finger
of the other hand hold and press on the screw threads of the
battery case and pull out the battery case (1) from the slot.
2. Push corner A outswards to release the used battery.
3. To insert new battery, slide one side of new battery be-
neath the retainer notch B & C. Press the other side of bat-
tery till it clips underneath the corner A. Ensure to observe
the polarity as illustrated in the drawing.
4. Insert the battery case back to the slot on the scale.
14

Publicité

Table des Matières
loading

Table des Matières