Important Safety Instructions - Gloria FoamMaster FM10 flex Mode D'emploi

FM10_flex.qxp_Innenseiten_FM10 flex.qxd 08.02.18 16:29 Seite 10

Important safety instructions

GB
These operating instructions familiarise you
with important safety instructions and in-
formation required to operate the device
properly!
N
Please read the instructions carefully, keep
them in a safe place and pass them on to
the next owner with the device,
if necessary!
All safety instructions serve for your per-
sonal protection as well!
l
This device is in compliance with the generally
accepted technical rules and the relevant safety
regulations.
l
This device may be used by young people from
16 years and above and by persons with di-
minished phys ical, sensorial or mental capaci-
ties or lack of experience and know ledge if su-
pervised or if they have been instructed with
respect to safe use of the device and understand
the risks that result from using it. Children must
not play with the device. Cleaning and user
maintenance must not be performed by chil-
dren without supervision.
l
Use device as intended!
l
Check the functioning of the spray device each
time before startup, paying special attention
to the hose connection and the screw connec-
tors. Check material for cracks, brittleness and
corrosion.
l
Do not expose the filled tank to strong sunshine
for any long period of time. Operating tem-
peratures
+ 40 °C. Protect device against frost.
l
Clean tank thoroughly immediately after use
and then dry completely.
l
Spraying agents that are environmen-
tally harmful should be use up as far as
possible on the object of the spraying, any
unavoidable residues should be put in a
must not exceed
suitable holding container and sent for
special disposal. Observe all laws and reg-
ulations concerning materials hazardous
to waters when temporarily storing and
disposing of such materials.
l
Keep away spraying devices and agents from
children, animals and waters.
l
Do not try to clear blocked nozzles by blowing
them out with your mouth.
l
The device is not intended to store liquids, it
must be emptied out after each time it has
been used and washed out thoroughly.
l
Always check the the safety / pressure
relief valve (C) when pumping up the device
and do not exceed the maximum permissi-
ble pressure of 3 bar.
l
All parts that are under pressure or conduct the
liquid or operating parts and the the safety / pres-
sure relief valve (C)must be checked regularly
to ensure that they are in perfect condition and
function properly. Stop using the device at once
if any damage is suspected.
l
Do not allow it to remain pressurised for an
extended period.
l
As a precautionary measure, we recommend
that the pump spray device be subjected to a
particularly thorough inspection every two
years, preferably by the manufacturer.
Repairs to the tank are not permitted.
l
Observe the accident prevention regulation
"DGUV Regeln 100-500; Betreiben von Ar-
beitsmitteln [DG-UV Rule 100-500; operat-
ing work equipment]".
l
Repairs to the equipment should only be
carried out by GLORIA Service Stations.
Order spare parts from your authorised
dealer. If the required parts are not in
stock, he will procure them for you as
quickly as possible.
10