Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.6
PIVOTING HEAD FUNCTION
NOTE
Adjust pivoting head to trim areas which are hard to
reach and for users to operate comfortably.
1. Stop the machine.
2. Push on the pivoting button （13） and turn the
shaft until the trimmer head locks into required
position.
3. Release the pivoting button.
8.7
OPERATION TIPS
WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
•
Keep a firm hold with the two hands on the machine
while you operate the machine.
•
Cut tall grass from the top down.
If grass winds around the trimmer head:
•
Remove the battery pack.
English
•
Remove the grass.
8.8
CUTTING TIPS
Danger area
•
Tilt the machine toward the area to be cut. Use the
tip of the cutting line to cut grass.
•
Move the machine from right to left to prevent
thrown debris from hitting the operator.
•
Do not cut in the danger area.
•
Do not force the trimmer head into uncut grass.
•
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood
can wear the cutting line quickly.
9
MAINTENANCE
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or
do the maintenance work on the machine.
Make sure that all nuts, bolts and screws are tight.
Examine regularly that you install the handles tightly.
Use only the replacement parts and accessories of the
initial manufacturer.
9.1
GENERAL INFORMATION
Only your dealer or approved service center can do
the maintenance that is not given in this manual.
Before the maintenance operations:
•
Stop the machine.
•
Remove the battery pack.
•
Cool the motor.
•
Store the machine in cool and dry place.
7
Direction of
rotation
Best cutting area
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
EN
Publicité
Chapitres
Table des Matières
Dépannage
