Electrical Connection; Risk Of Electrocution - Wilo RAIN3 Notice De Montage Et De Mise En Service

7.5

Electrical connection

Installation and operating instructions Wilo-RAIN3
Installation
Black arrow: suction
White arrow: discharge
4: city main water inlet (G3/4'')
7: discharge connecting hose (G1'' swivel nut)
8: suction connecting hose (G1'' swivel nut)
DANGER

Risk of electrocution!

Risk of electrocution in case of an incorrect electrical connection. The electrical con-
nection must be exclusively performed by an electrician qualified by the local energy
supplier and in compliance with the current local regulations.
The system must be supplied by a circuit composed of a residual differential current
device (RCD), with an assigned differential current of maximum 30 mA.
ƒ
The system is ready for connection.
ƒ
The current type and the supply network voltage should comply with the specifica-
tions on the rating plate. It is necessary to connect RAIN3 to a power supply with an
impedance of 0.3 ohm at maximum.
CAUTION
The device socket being the main switch of the system must be reachable at any
time for safety.
en
41