Fueling; Transport And Storage; Long-Term Storage - Husqvarna K970 II Rescue Manuel D'utilisation

Fueling

WARNING! Always stop the engine and
!
let it cool for a few minutes before
refueling. The engine should be switched
off, and the stop switch in STOP position.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Clean the area around the fuel cap.
Tighten the fuel cap carefully after
refueling. If the cap is not properly
tightened the cap might vibrate lose and
fuel may escape from the fuel tank
creating a fire hazard.
Move the machine at least 10 ft (3 m)
from the refuelling point before starting
it.
Never start the machine:
• If you have spilled fuel or engine oil on the machine.
Wipe off the spillage and allow remaining fuel to
evaporate.
• If you have spilled fuel on yourself or your clothes,
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
• If the machine is leaking fuel. Check regularly for
leaks from the fuel cap and fuel lines.
• Unless the fuel cap is securely tightened after
refueling.

Transport and storage

• Store and transport the machine and fuel so that there
is no risk of any leakage or fumes coming into contact
with sparks or open flames, for example, from
electrical machinery, electric motors, electrical relays/
switches or boilers.
• When storing and transporting fuel always use
approved containers intended for this purpose.

Long-term storage

• When storing the machine for long periods the fuel
tank must be emptied. Contact your local gas station
to find out where to dispose of excess fuel.
14 – English
FUEL HANDLING