Brandt BPV6210B Manuel D'instruction page 38

b) Setting the independent timer
Touch the timer control.
Set the time by touching the "-" or "+" control.
Touch the timer control again to confirm your timer-setting, or
wait for 5 seconds until it confirms automatically.
When the time is set, it will begin to count down immediately. The
display will show the remaining time.
When independent timer expires, the hob will emit a beep and will
continue heating until you turn it off.
Note:
a) If you want to change the time after the timer is set, you have to start again from step 1.
b) Direct access to the timer "99" minutes by pressing the "-" control key at first time.
c) When scrolling down to " 0 ",touch the "-" again and the time will go back to "99" minutes.
d) The method for setting two zones is the same as mentioned above.
If two cooking zone timers have been set,
corresponding cooking zone is blinking.
shortest set time is displayed. and the red dot of the
the
EN-15