System Requirements; Driver Installation - i-tec C31TRAVELDOCKPD20 Mode D'emploi

i-tec USB-C Travel Dock 4K HDMI/VGA

SYSTEM REQUIREMENTS

Hardware requirements: Requires USB-C interface with „DisplayPort Alternate
Mode" and „Power Delivery" support (not all devices / systems with USB-C
interface support this as standard) or Thunderbolt 3 port
Operating system: Windows 10 32/64bit, macOS X, Google (Chrome OS and
Android 6 and higher) with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking station are
installed automatically on the system. Before installation make sure that your
system has installed the latest drivers for your device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before installation
make sure that your Mac has installed the latest OS for your device.
CONNECTING A HDMI MONITOR
The docking station is equipped with 1x HDMI 4K Ultra HD port for the
connection of an external monitor or beamer with a HDMI interface. For
displaying your images you can use a modern plazma or LCD monitors and TVs.
The graphic chip, which is the heart of the docking station, supports up to 4K
resolution 3840x2160@30Hz. Connect the monitor to the docking station using
a highquality HDMI cable. During installation of an additional monitor the screen
of the notebook or tablet can flicker which is a standard condition.
CONNECTING A VGA MONITOR
The docking station is equipped with 1x VGA Full HD port for the connection of an
external monitor or beamer with a VGA interface. For displaying your images you
can use a plazma or LCD monitors and TVs. Connect the monitor to the docking
station using a VGA cable. During installation of an additional monitor the screen
of the notebook or tablet can flicker which is a standard condition.
It is not possible to use both graphic outputs simultaneously, a single monitor
only can be connected to the docking station (HDMI or VGA).
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router / switch
and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.
CONNECTING USB DEVICES
You can use USB 3.0 ports for connecting your keyboard, mouse, external hard
drive, printer and other devices or you can use it for connecting a USB HUB, which
will give you more free USB ports.
10 |
ENGLISH