ION TOTAL PA GLOW MAX Guide D'utilisation Rapide page 9

Pairing with a Bluetooth Device
1. Power on the Total PA
automatically enter Bluetooth pairing mode.
2. Navigate to your device's Bluetooth setup screen, find Total PA Glow Max, and connect. Do
not connect to Total PA Glow Max_BLE; this is reserved exclusively for connecting to the
ION Sound XP
will hear "Connected".
Note: If you experience trouble in connecting, select "Forget this Device" on your Bluetooth
device and try to connect again.
3. To disconnect, turn off Bluetooth from your device's Bluetooth settings.
Linking Two Compatible Speakers (Stereo-Link 2.0
Power on both Total PA
1.
they are in Bluetooth pairing mode and not connected to a device.
Press and hold the Repeat/Link button on one speaker (the primary speaker which will
2.
control both) to enter Stereo Link mode. Once a link has been established, the word LINK will
appear on both speaker displays.
3. Connect to the primary speaker via Bluetooth.
To disconnect, double press the Repeat/Link button.
Note: The speakers should be within 100' (33.3 m) of each other to properly link.
™
Note: Total PA Glow Max is not compatible with previous ION PA models. To link to a previous
model, use an XLR cable (not included) and link from the newer PA to the previous one via the
XLR Out on Total PA
SD/USB Mode
Press the Mode button to toggle through to select SD or USB mode. Total PA
automatically play the first compatible file. Files are played in alphabetical order of what is on the
root level, then alphabetical by folder, and then alphabetical by track name. Media playback will
stop when all media has been played on the SD card or USB drive. Press and hold the Next and
Previous buttons to fast forward or rewind within the song.
Note: The SD card or USB drive must have playable files for it to appear on the media panel's
display. If there is no USB drive or SD card inserted into the media panel, press and release the
Mode button will toggle through Bluetooth and radio.
Repeat settings (abbreviations will show on the display):
• ALL: Repeat all of the tracks in the folder.
• FOLd: Repeat all of the tracks in the folder.
• OnE: Repeat the current playing USB track.
• rAn: Shuffle the track order.
™
Glow Max by flipping the on/off switch. Total PA
™
app. When connected, the Bluetooth icon on the display will flash and you
™
Glow Max speakers by flipping their on/off switches. Make sure
™
Glow Max and the XLR Aux In on the previous model.
™
):
™
Glow Max will
™
Glow Max will
9