ION TOTAL PA GLOW MAX Guide D'utilisation Rapide page 6

12. Light Mode Button: Press this button to toggle between one of these five modes for the
lights on the front panel.
•
Color Cycle: The lights slowly glow and cycle through colors. This is the default mode
when Total PA
freeze the lights on one color. Press and release the button to unfreeze.
•
Beat Sync: The lights flash and change colors according to the tempo of the music
playing on the speaker. For the best lighting effect, you may need to adjust the volume of
your device, the source volume, and/or the main volume.
•
Color Wheel: The lights rotate in a wheel of all colors.
•
Color Beat Sync: The lights rotate in a wheel of all colors and change direction and speed
according to the tempo of the music playing on the speaker. For the best lighting effect,
you may need to adjust the volume of your device, the source volume, and or the main
volume.
•
Off: The lights turn off.
13. Power Cable Input (IEC): Insert the included power cable here to charge the unit.
14. Power Switch: Flip this switch to toggle the speaker's power on or off.
™
Note: Total PA
6
™
Glow Max is first powered on. Press and hold the light mode button to
Glow Max will power off after 15 minutes with no audio playing.