Scallop Stitching; Twin Needle - SilverCrest SNMD 33 A1 Instructions D'utilisation Et Consignes De Sécurité

Scallop stitching

1

Twin needle

Stitch
This machine automatically produces a
scallop stitch which may be used as
decorative edging.
1. Sew the scallop stitch along the edge of
the material.
2. If desired, trim around the scallop with
scissors to create a scalloped edge. Be
careful not to cut the thread.
2
Stitch
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
a low speed to insure quality stitching.
When using twin needle on zig-zag make
sure the stitch width dial is set between "0"
and "3". Do not use twin needle at setting
above "3".
- Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
- Insert the twin needle in the same way as
single needle. Flat side of needle should
face away from you.
- Follow instructions for single needle
threading. Thread each needle separately.
Sewing basics
Stitch width Stitch length
I 3~5
Stitch width Stitch length
A 2.5
1~2
1~4
GB/ IE 89