Getting Ready; Connecting Machine To Power Source; Installing The Snap-In Sewing Table - SilverCrest SNMD 33 A1 Instructions D'utilisation Et Consignes De Sécurité

Connecting machine to power source

Installing the snap-in sewing table

Attention:
Unplug power cord when machine is not
in use.
Attention:
Consult a qualified electrician if in doubt
as to connect machine to power source.
Unplug power cord when machine is not
A A
in use.
The foot control must be used with the
appliance by FC-2902B (220-240V area)
manufactured by
motor corporation ltd, China).
Connect the machine to a power source as
illustrated.
Sewing light
Press main switch (A) for power and light
on. (" l ")
Foot control
Foot control regulates the sewing speed.
Keep the snap-in sewing table horizontal,
and push it in the direction of the arrow.
The inside of the snap-in sewing table can
be utilized as an accessory box.

Getting ready

FDM (zhejiang founder
GB/ IE 75