Connecting Wires To Terminals - Kenwood KIV-BT901 Guide De Démarrage Rapide

Connecting Wires to Terminals

Light Green (Accessory 3)
For the sake of safety, be sure to connect the parking sensor.
⁄
Connect to vehicle's reverse
lamp harness when using the
optional rear view camera.
USB device
(commercially available)
iPod
(commercially
available)
KCA-iP202
(option)
⁄
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic part
of the vehicle.
⁄
• Speaker Impedance
: 4 – 8 Ω
• USB terminal Maximum
Supply current
: DC 5 V 1 A
Ignition key
switch
Car fuse box
(Main fuse)
+
Battery
16 | Quick Start Guide
Connect to the vehicle's parking brake detection switch harness.
Purple/White
(Accessory 4)
To front right speaker
To rear right speaker
Car fuse
box
–
Light Green (Parking sensor wire)
Purple/White (Reverse sensor wire)
CA-U1EX
(option)
Rear View Camera Input
("R-CAM Interruption" page 13)
Microphone (Accessory 7)
(KIV-BT901 only)
To front left speaker
To rear left speaker
ACC
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire) · (To car chassis)
USB connector
(1 m (3.2 ft))
Microphone input
(KIV-BT901 only)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black