Service And Support; Calibration; Repairs And Returns To Sdc; Specifications - SDC MLD-810 Manuel D'utilisation

Service and Support

Calibration

We suggest that your practice establish an internal verification program for your laser.
Verification is recommended a minimum of once per year based on average usage.
Repairs and Returns to SDC - Société des Cendres
Should you encounter technical issues with your MLD-810 Laser, please contact
SDC - Société des Cendres at 01-49-61-41-41. A Customer Care Representative will
assist you and attempt to troubleshoot your issue over the phone.
If it is determined that your laser needs to be returned to SDC - Société des Cendres
for service or repair, a Return Material Authorization ("RMA") number will be provided
to you. The RMA number must appear on the outside of the shipping container. Any
returns sent to SDC - Société des Cendres without a RMA will not be eligible for
processing.
NOTE: For a complete explanation of the MLD-810 Limited Product Warranty, please
reference the Warranty Information Card that was included with your initial purchase.

Specifications

Dimensions of Base Charger:
Dimensions of Laser:
Weight:
Laser classification:
Delivery system:
Wavelength:
Maximum power:
Aiming beam wavelength:
Aiming beam power:
Beam divergence:
Power range:
Pulse frequency:
Pulse duration:
Duty cycle:
Audible notification:
Power requirements:
Charger current:
Battery:
20 minutes continuous lasing time @ 1.2 watts
Wireless Foot Pedal frequency:
Foot Pedal power source:
2.7" H x 2.9" W x 8.0" L
6.9" L x 0.65" diameter
1.9 ounces
Class IV laser device
Optical Fiber
Laser 808 nm ± 5 nm
2 Watts ± 20%
650 ± 10 nm
0.5 mW max
617 mrad
0.1 watt to 2.0 watts
Fixed 10 Hz
Fixed 0.05 seconds
Pulse Mode: 50%
Continuous Wave Mode: 100%
Yes
100-240 VAC @ 50 to 60 Hz
0.6 Amps
Rechargeable lithium-ion
8 hours standby time
2.4 GHz
AA Batteries (provided)
44